JASO M610汽车零部件外涂层腐蚀试验箱

Constacon® TR
这个系列为手动操作卧式系统M-TR,用于DIN EN ISO 6270-2冷凝水试验

 
Constasal® TR
这个系列为手动操作卧式系统M-TR用于DIN EN ISO 9227盐雾试验，不带自动通风

 
Constatwin® TR
这个系列为手动操作卧式系统M-TR用于执行盐雾试验和冷凝水试验，这个系列为手动操作综合试验箱

 
Constamatic® TR
这个系列为A-TR可编程操作卧式试验系统 ，在控制面板上，系统非常容易编程 。所有功能都显示为多行菜单。 可编程系统可安装在盐雾试验系统或综合试验系统上
 

 
 

冷凝试验

 
循环腐蚀试验箱

 
满足VDA 233-102 -20度新版标准试验箱已可以接受预定，设备型号为SKBWF-FC 1000 A-TR
 
 

VDA 233-102

Cyclic corrosion testing of materials & components in automotive construction.

The purpose of this test is to provide an accelerated test procedure for the assessment of the corrosion behaviour of components and of the corrosion protection provided by coating systems. The test method is based on real corrosive conditions and delivers differentiated results for a large number of uses in automotive applications

Test specimens are placed in an enclosed chamber, and positioned at an angle of 65° to 75° to the horizontal with the side to be tested uppermost. The salt spray phase is performed with a 1% solution of sodium chloride, (pH 6.5 to 7.1) and falls out onto the specimens at a rate of 2.0 to 4.0ml/80cm2/hour.

A full test cycle lasts 7 days and consists of:

Cycles A,B & C are multi step cycles consisting of varying degrees of temperature from -15°C to +50°C and humidity values of between 50% and 95%.

The typical test duration is six full test cycles. (6 Weeks)