德国Liebisch进口K300冷凝水试验箱

可完成标准如下：

DIN EN ISO 6270-2

DIN 50018

DIN EN ISO 6988

Gasomat

通过这个系统，需求的腐蚀气体体积加注到试验箱内。

这个手动操作附件通过更可换的流体系统准确加注气体。腐蚀气体由专门气瓶供应。

l Cabinet model made of high-quality glass-fibre reinforced polyester resin with adjustable feet (to
operate on table/ bench)
高性能加强型多层玻璃纤维树脂箱体，带可调底脚（可在桌面/长凳上操作）
l Programmable ventilation unit for drying of the testing chamber and the samples (e.g.: DIN 50017
KFW, DIN 50018, DIN EN ISO 6988)
可编程的换气单元，用于干燥试验箱和实验样品，如
DIN 50017 KFW, DIN 50018, DIN EN ISO 6988
l Automatic test procedure
(test phase 1 - 8 hours heating/ test phase 2 - 16 hours cooling).
自动试验程序
第测试阶段-8小时加热，第二测试阶段-16小时冷却
l The test room door remains closed even after finish of the first test phase.
第测试阶段结束后，试验箱门依然保持关闭状态。
l High reliability and protection in case of operating with insufficient water because heating element
underneath
可靠性高。可以在缺水时保护底下带加热元件的底板
l Optimal evaporation conditions due to regular water level and heating of the whole bottom area
通过调节水位和给底部整体加热达到蒸发条件
l Testing chamber volume approx. 300 litres
试验箱体容积约300升
l Optimal supervision of the testing sequence due to lockable safety glass door (to be opened to the
front by approx. 180°)
试验箱门具有可锁定的玻璃门（可向前开约180度），可实现监控
l Testing chamber seals made of foam silicone profiles
试验箱采用泡沫硅树脂密封
l Sample depot made of fully non-corrosive and deflection-resistant glass-fibre reinforced and PE round
tubes
SO2 冷凝水试验箱

防腐，防变形的加强型玻璃纤维圆管塑料样品架
l Electronic micro-processor controlled temperature control (PID) of testing chamber
l LED display resolution of set and actual value 0,1°C. Temperature constancy <±0,5°C.
试验箱和加湿器装有微电子处理器操控的温度控制（PID）；LED显示设定值和实际值分辨率 0,1°C，
温度稳定度 <±0,5°C.
l The cabinet is supplied fully equipped and ready for connection.
The standard delivery scope includes:
With Manual valve and 2m PVC-hose for emptying the testing chamber
试验箱配置齐全，准备就绪，可以马上进行连接
标准发货范围：
带有手动阀的2米PVC排水管，可排空试验箱