• Ci4000氙灯老化试验机

    详细信息

     品牌：美国ATLAS  型号：Ci4000  加工定制：否  
     类型：氙灯老化试验箱  材质：金属塑料  温度范围：0-100 ℃ 
     功率：6500 W 工作室尺寸：400x500x300 mm 电源：380V  
     适用范围：汽车塑料油漆涂料氙灯老化试验    

    •  
      支持6500W大功率精密水冷式氙灯灯管
    • 总曝晒面积：6,500 cm2 (1,008 in2)
    • 自动旋转式3层样品架
    • 大屏幕全彩色TFT显示自动诊断信息
    • 直接设置和控制辐照度340nm、420nm、300-400nm
    • 直接控制箱内温度及黑板或/和黑标温度
    • 直接设置和控制相对湿度
    • 直接设置和控制试验舱内空气温度
    • 显示诊断信息
    • 内置14个***主要国际标准
    • 支持12个客户自定义编程
    • 多语种显示（中、英、法、德、西、日、韩）
    • U盘数据输出接口
    • 内置全球专利的Smart Damper™自动送风风速调节及智能化调风系统
    • 内置全球专利的Smart Light™智能化灯光监测系统
    • 样架背面喷淋系统
    • 过滤组合以满足全部测试标准
    • 进气管除尘过滤器
    • CS-7氙灯冷却系统
    • 自动水质监控及自动报警
    • 参照氙灯校准
    • 试验箱观察窗
    • 全球通用电源系统，适用于各种频率、电压和电气要求
    • 电气安全性能满足CE、UL、CSA、EN、ISO标准
    • 以辐照量和时间为单位自动倒计时功能
    • 样品架可容纳多种类型的样品
    • VibraSonicTM加湿系统

    • BPT/BST双控：可选
    • 辐照度控制：340/420或300-400nm选择单点自动控制,可选第二点监控
    • 安装在风道里的制冷线圈（不包含必要的制冷装置）
    • S3T特定试件表面温度系统
    • WXView（气候观察）数据获取系统
    • LiquiAirTM - LiquiAir热交换器可减少Ci5000氙灯冷却系统对自来水的需求，该系统采用室内外的空气来冷却氙灯水。
    • 室内空气和去离子水制冷
    可选配置
    • 满足特殊测试要求的辅助过滤灯罩
    • Caster（4脚）包括适配器和安装说明
    • LS-200全谱监测设备
    • 伸展腿（4脚：提升装置 15厘米）

    符合标准
    • AATCC TM169
      Weather Resistance of Textiles: Xenon Lamp Exposure
    • ASTM C1257
      Standard Test Method for Accelerated Weathering of Solvent-Release-Type Sealants
    • ASTM C1442
      Standard Practice for Conducting Tests on Sealants Using Artificial Weathering Apparatus
    • ASTM C1501
      Standard Test Method for Color Stability of Building Construction Sealants as Determined by Laboratory Accelerated Weathering Procedures
    • ASTM C732
      Standard Test Method for Aging Effects of Artificial Weathering on Latex Sealants
    • ASTM C734
      Standard Test Method for Low-Temperature Flexibility of Latex Sealants After Artificial Weathering
    • ASTM C793
      Standard Test Method for Effects of Accelerated Weathering on Elastomeric Joint Sealants
    • ASTM D1148
      Standard Test Method for Rubber Deterioration—Discoloration from Ultraviolet (UV) or UV/Visible Radiation and Heat Exposure of Light-Colored Surfaces
    • ASTM D1670
      Standard Test Method for Failure End Point in Accelerated and Outdoor Weathering of Bituminous Materials
    • ASTM D2565
      Standard Practice for Xenon Arc Exposure of Plastics Intended for Outdoor Applications
    • ASTM D3424
      Standard Test Methods for Evaluating the Relative Lightfastness and Weatherability of Printed Matter
    • ASTM D3451
      Standard Guide for Testing Coating Powders and Powder Coatings
    • ASTM D4101
      Standard Specification for Polypropylene Injection and Extrusion Materials
    • ASTM D4303
      Standard Test Methods for Lightfastness of Pigments Used in Artists' Paints
    • ASTM D4355
      Standard Test Method for Deterioration of Geotextiles from Exposure to Ultraviolet Light and Water (Xenon-Arc Type Apparatus)
    • ASTM D4434
      Standard Specification for Poly(Vinyl Chloride) Sheet Roofing
    • ASTM D4459
      Standard Practice for Xenon-Arc Exposure of Plastics Intended for Indoor Applications
    • ASTM D4798
      Standard Test Method for Accelerated Weathering Test Conditions and Procedures for Bituminous Materials (Xenon-Arc Method)
    • ASTM D4811
      Standard Specification for Nonvulcanized (Uncured) Rubber Sheet Used as Roof Flashing
    • ASTM D5010
      Standard Guide for Testing Printing Inks and Related Materials
    • ASTM D5019
      Standard Specification for Reinforced CSM (Chlorosulfonated Polyethylene) Sheet Used in Single-Ply Roof Membrane
    • ASTM D5071
      Standard Practice for Exposure of Photodegradable Plastics in a Xenon Arc Apparatus
    • ASTM D5383
      Standard Practice for Visual Determination of the Lightfastness of Art Materials by Art Technologists
    • ASTM D5398
      Standard Practice for Visual Evaluation of the Lightfastness of Art Materials by the User
    • ASTM D5819
      Standard Guide for Selecting Test Methods for Experimental Evaluation of Geosynthetic Durability
    • ASTM D6083
      Standard Specification for Liquid Applied Acrylic Coating Used in Roofing
    • ASTM D6551
      Standard Practice for Accelerated Weathering of Pressure-Sensitive Tapes by Xenon-Arc Exposure Apparatus
    • ASTM D6577
      Standard Guide for Testing Industrial Protective Coatings
    • ASTM D6662
      Standard Specification for Polyolefin-Based Plastic Lumber Decking Boards
    • ASTM D6695
      Standard Practice for Xenon-Arc Exposures of Paint and Related Coatings
    • ASTM D6878
      Standard Specification for Thermoplastic Polyolefin Based Sheet Roofing
    • ASTM D7869
      Standard Practice for Xenon Arc Exposure Test with Enhanced Light and Water Exposure for Transportation Coatings
    • ASTM F1164
      Standard Test Method for Evaluation of Transparent Plastics Exposed to Accelerated Weathering Combined with Biaxial Stress
    • ASTM G151
      Standard Practice for Exposing Nonmetallic Materials in Accelerated Test Devices that Use Laboratory Light Sources
    • ASTM G155
      Standard Practice for Operating Xenon Arc Light Apparatus for Exposure of Non-Metallic Materials
    • FLTM BO 116-01
      Resistance to interior weathering
    • GB/T 8427
      Textiles - Tests for color fastness - Color fastness to artificial light: Xenon arc fading lamp test
    • GM 9125P
      Procedures for Laboratory Accelerated Exposure of Automotive Materials
    • GME 60292
      Designation of Colour Fastness and Resistance to Artificial Light
    • GMW 14162
      Colorfastness to Artificial Weathering
    • GMW 14650
      Performance Requirements for Exterior Plastic Parts
    • GMW 3414
      Test Method for Artificial Weathering of Automotive Interior Trim Materials
    • IEC 61345
      UV test for photovoltaic (PV) modules
    • ISO 105-B02
      Textiles - Tests for colour fastness - Part B02: Colour fastness to artificial light: Xenon arc fading lamp test
    • ISO 105-B04
      Textiles - Tests for colour fastness - Part B04: Colour fastness to weathering: Xenon arc test
    • ISO 105-B06
      Textiles - Tests for colour fastness - Part B06: Colour fastness and ageing to artificial light at high temperatures: Xenon arc fading lamp test
    • ISO 105-B10
      new standardTextiles - Tests for colour fastness - Part B10: Artificial weathering - Exposure to filtered xenon-arc radiation
    • ISO 11341
      Paints and Varnishes - Artificial Weathering and Exposure to Artificial Radiation - Exposure to Filtered Xenon-Arc Radiation
    • ISO 12040
      Graphic technology - Prints and printing inks - Assessment of light fastness using filtered xenon arc light
    • ISO 16474-1
      Paints and varnishes - Methods of exposure to laboratory light sources - Part 1: General guidance
    • ISO 16474-2
      Paints and varnishes - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps
    • ISO 18909
      Photography - Processed photographic colour films and paper prints - Methods for measuring image stability
    • ISO 3917
      Road vehicles - Safety glazing materials - Test methods for resistance to radiation, high temperature, humidity, fire and simulated weathering
    • ISO 4892-1
      Plastics - Methods of exposure to laboratory light sources - Part 1: General guidance
    • ISO 4892-2
      Plastics - Methods of exposure to laboratory light sources - Part 2: Xenon-arc sources
    • JASO M346
      Light-exposure test method by xenon-arc lamp for automotive interior part
    • JASO M351
      Automotive parts - Accelerated weathering testing method by xenon-arc lamp for exterior parts
    • JIS B 7754
      Light-exposure and light-and-water-exposure apparatus(xenon arc lamp type)
    • JIS D 0205
      Test Method of Weatherability for Automotive Parts
    • MIL-STD 810F
      Environmental engineering considerations and laboratory tests - Part 2: Laboratory test methods - 505.4: Solar radiation (Sunshine)
    • MIL-STD 810G
      Environmental engineering considerations and laboratory tests - Part 2: Laboratory test methods - 505.5: Solar radiation (Sunshine)
    • Peugeot Citroen (PSA) D47 1431
      Materials and Parts in the Passenger Compartment Appearance Behaviour to Artificial Light at High and Mean Temperatures
    • SAE J1885
      Accelerated Exposure of Automotive Interior Trim Components Using a Controlled Irradiance Water Cooled Xenon-Arc Apparatus
    • SAE J1960
      Accelerated Exposure of Automotive Exterior Materials Using a Controlled Irradiance Water-Cooled Xenon Arc Apparatus
    • SAE J2412
      Accelerated Exposure of Automotive Interior Trim Components Using a Controlled Irradiance Xenon-Arc Apparatus
    • SAE J2413
      Protocol To Verify Performance of New Xenon Arc Test Apparatus
    • SAE J2527
      Performance Based Standard for Accelerated Exposure of Automotive Exterior Materials Using A Controlled Irradiance Xenon-Arc Apparatus
    • VDA 621-429
      Tests for automotive coatings - Weathering test for colour fastness
    • VDA 621-430
      Tests for automotive coatings - Test for resistance to cracking of 2 layer metallic clear coats
    • VDA 75202
      Automotive interior materials - Colourfastness and ageing test against light at high temperatures: Xenon arc
    • VW PV 3930
      Non-Metallic Materials - Weathering in Moist, Hot Climate

  • 留言

    *详细需求：
    *手  机：
    联 系 人：
    电    话：
    E-mail：
    公  司：
    《谷瀑服务条款》《隐私政策》
上海鼎振仪器设备有限公司 邀您加盟谷瀑

公司首‍个通过审核的账号 => 免‍费领取3个月试用会员（可延期至1年） + 600颗谷瀑金豆

上海鼎振仪器设备有限公司 邀请您加盟谷瀑

公司首‍个通过审核的账号 => 免‍费领取3个月试用会员（最长可延期至1年） + 600颗谷瀑金豆
上海鼎振仪器设备有限公司 电话：021-32535039 手机：13472521719 地址： 上海市嘉定区德富路1198号803室太湖世家国际大厦
内容声明：谷瀑为第三方平台及互联网信息服务提供者，谷瀑（含网站、客户端等）所展示的商品/服务的标题、价格、详情等信息内容系由店铺经营者发布，其真实性、准确性和合法性均由店铺经营者负责。谷瀑提醒您购买商品/服务前注意谨慎核实，如您对商品/服务的标题、价格、详情等任何信息有任何疑问的，请在购买前通过谷瀑与店铺经营者沟通确认；谷瀑上存在海量店铺，如您发现店铺内有任何违法/侵权信息，请在谷瀑首页底栏投诉通道进行投诉。
水
污水
纯水
泵阀
填料
消毒
过滤
气
除尘
脱硫
洁净
废气
空分
通用
仪器
工控
暖通
五金
机床
安防
物流
印刷
工程
矿冶
噪声
材料
工程
机械
钢材
化工
化工
混合
真空
塑机
制药
食品
橡塑
防腐
防腐
涂装
风机
干燥
新能
节能
光伏
风能
市政
环卫
固废
园林
农机
北京 上海 天津 重庆 广州 东莞 杭州 上虞 慈溪 乐清 永嘉 苏州 扬州 常州 无锡 盐城 淮安 泊头 安平 固安 新河 郑州 新乡 济南 潍坊 诸城 青岛 淄博 萍乡
Copyright ©2003 - 2024 Goepe.com 版权所有 关于谷瀑 | 服务中心 | 著作权与商标声明 | 会员服务 | 隐私声明 | 网站导航